📋 About this paper
- Exam
- Ethiopian University Entrance Preparatory Exam (Physics, First Round Online Practice)
- Subject
- PHYSICS
- Sitting
- ESSLCE First Round · 2018 E.C. (2025/2026 G.C.)
- Time allowed
- 1 hour 30 minutes
- Questions
- 60
Exam directions
- This booklet contains 60 multiple-choice questions.
- Each question has four alternatives lettered A, B, C and D. Only ONE of them is the best answer.
- Read every question and all four alternatives carefully before you choose.
- Blacken the letter of your choice on the separate answer sheet. Do not write on this booklet.
- Work quickly and keep an eye on the clock.
Part I: Multiple Choice
Choose the best answer from the given alternatives and blacken the letter of your choice on your answer sheet.
- 1
A 25 kg box is dragged on a rough horizontal x-y plane from r₁=(1.3 î+1.4 ĵ) m to r₂=(8.3 î+2.9 ĵ) m by a force F⃗=(4 î−6 ĵ) N. How much work is done by the force?
- A19.0 J
- B37.0 J
- C15.8 J
- D-75.6 J
Show answer
A 19.0 J
Displacement is Δr = r₂ − r₁ = (7.0î + 1.5ĵ) m. Work is the dot product W = F⃗·Δr = (4)(7.0) + (−6)(1.5) = 28 − 9 = 19.0 J.
- 2
Two resistors with resistance of 3 Ω and 6 Ω are connected in parallel, and their combination is connected in series to a 4 Ω resistor. If the overall combination of the resistors is connected to a 12 V source, how much is the voltage drop across the 6 Ω resistor?
- A8 V
- B4 V
- C2 V
- D12 V
Show answer
B 4 V
The 3 Ω and 6 Ω parallel combination gives (3×6)/(3+6) = 2 Ω, in series with 4 Ω, so total resistance = 6 Ω. Total current = 12 V/6 Ω = 2 A. The voltage across the parallel section (which equals the voltage across the 6 Ω resistor, since parallel branches share voltage) is 2 A × 2 Ω = 4 V.
- 3
A constant force of 250.0 N is applied horizontally on a box that lays on a horizontal frictionless surface. If the box accelerates with 4.0 m/s², what is its mass?
- A125.0 kg
- B41.7 kg
- C10.4 kg
- D62.5 kg
Show answer
D 62.5 kg
By Newton's second law, m = F/a = 250.0 N / 4.0 m/s² = 62.5 kg.
- 4
Four masses are placed on the corners of a square on the x-y plane as shown in the figure below, where m1=m2=200 g and m3=m4=500 g. Where is the center of mass (xcm,ycm) of the system?
- A(25,37.14) cm
- B(25,25) cm
- C(37.14,50) cm
- D(35.71,25) cm
Show answer
D (35.71,25) cm
Taking m1 at (0,0), m2 at (0,50), m3 at (50,50), m4 at (50,0) cm, total mass = 200+200+500+500 = 1400 g. x_cm = (200·0+200·0+500·50+500·50)/1400 = 50000/1400 ≈ 35.71 cm. y_cm = (200·0+200·50+500·50+500·0)/1400 = 35000/1400 = 25 cm, giving (35.71, 25) cm.
- 5
Ethiopian Physical Society is established by interested Ethiopian physics professionals to:
- APrepare physics curriculum under the ministry of education directives.
- BContribute its own share to promote physics education and research.
- CTake part in election and participate in government formation.
- DMonitor and supervise the curriculum implementation in Ethiopian high schools.
Show answer
B Contribute its own share to promote physics education and research.
Professional societies such as the Ethiopian Physical Society exist to advance and promote physics education, research, and the profession in the country — not to set official curriculum, take part in politics, or supervise schools, which are government functions.
- 6
A rectangular wire loop is connected to a 3 V battery as shown below. What will happen to the direction of the magnetic field inside the loop if the terminals of the battery are reversed?
- AIt will change from into the plane to out of the plane.
- BIt will change from out of the plane to into the plane.
- CIt will change from counterclockwise to clockwise.
- DIt will change from clockwise to counterclockwise.
Show answer
A It will change from into the plane to out of the plane.
Reversing the battery terminals reverses the direction of current flow around the loop, which by the right-hand rule reverses the direction of the magnetic field through the loop. Given the original wiring shown, the field inside switches from pointing into the page to pointing out of the page.
- 7
The magnetic field created by a current-carrying wire at a point from the wire will:
- AIncrease exponentially with the increase in the magnitude of the current.
- BDecrease linearly with the increase in the magnitude of the current.
- CDecrease exponentially with the increase in the magnitude of the current.
- DIncrease linearly with the increase in the magnitude of the current.
Show answer
D Increase linearly with the increase in the magnitude of the current.
For a long straight current-carrying wire, B = μ₀I/(2πr), so the field strength is directly (linearly) proportional to the current I at a fixed distance r.
- 8
The iodine isotope ¹³¹I, which has an eight-day half-life, is used in nuclear medicine. What is the decay constant of the isotope? (ln2=0.693)
- A5.64 day⁻¹
- B8.66×10⁻² day⁻¹
- C1.17×10⁻² day⁻¹
- D12.5 day⁻¹
Show answer
B 8.66×10⁻² day⁻¹
The decay constant is λ = ln2/T½ = 0.693/8 days ≈ 8.66×10⁻² day⁻¹.
- 9
The velocity of car B with respect to a passenger in car A is 80 km/hr towards West. If the velocity of car A with respect to the ground is 30 km/hr towards East, what would be the velocity of car B with respect to the ground?
- A50 km/hr towards West
- B50 km/hr towards East
- C110 km/hr towards East
- D110 km/hr towards West
Show answer
A 50 km/hr towards West
Using relative velocity addition, v(B,ground) = v(B,A) + v(A,ground). Taking East as positive: v(B,A) = −80 km/h, v(A,ground) = +30 km/h, so v(B,ground) = −80+30 = −50 km/h, i.e. 50 km/h towards West.
- 10
Which one of the following statements correctly describes the rotation of an object around a fixed axis?
- AAngular acceleration is perpendicular to the plane of rotation and in the same direction as angular velocity if the rotation rate is increasing.
- BParticles in the object that are closer to the axis will have different angular displacement from particles that are far from it.
- CParticles in the object closer to the axis will have larger angular velocity than particles that are farther from the axis.
- DParticles that are closer to the axis will have similar translational displacement from particles that are far from it.
Show answer
A Angular acceleration is perpendicular to the plane of rotation and in the same direction as angular velocity if the rotation rate is increasing.
For a rigid body rotating about a fixed axis, both angular velocity and angular acceleration point along the rotation axis (perpendicular to the plane of rotation); when the spin rate increases, angular acceleration points the same way as angular velocity. All particles share the same angular velocity and angular displacement regardless of their distance from the axis (ruling out B and C), while their translational (linear) displacement differs with radius (ruling out D).
Sit the whole paper with a timer, get your score, and read every answer explained.