📋 About this paper
- Exam
- Ethiopian University Entrance Exam (Physics) — EUEE 2011 E.C. Answer Key compilation
- Subject
- PHYSICS
- Sitting
- EUEE 2011 E.C. (2018/2019 G.C.)
- Time allowed
- 2 hours
- Questions
- 50
Exam directions
- This booklet contains 50 multiple-choice questions covering mechanics, waves and optics, electricity and magnetism, thermal physics, and modern physics.
- Each question has four alternatives lettered A, B, C and D. Only ONE of them is the best answer.
- This compilation, produced by Qubee Academy, includes a worked solution and explanation for every item.
- One item (the fluid-density question) has no answer among its listed choices that matches the computed value; this is preserved from the original answer key, which itself marks it 'NO ANSWER'.
Part I: Multiple Choice
Choose the best answer from the given alternatives for each question.
- 1
Two forces F1 = 3i N and F2 = 4j N act on a particle of mass m. What is the magnitude and direction of a force that balances the two?
- AF_eq = 5 N at 143° counterclockwise from F2
- BF_eq = 7 N at 127° counterclockwise from F1
- CF_eq = 7 N at 127° counterclockwise from F2
- DF_eq = 5 N at 143° counterclockwise from F1
Show answer
A F_eq = 5 N at 143° counterclockwise from F2
The resultant of F1 and F2 has magnitude √(3²+4²) = 5 N, at angle θ = tan⁻¹(4/3) = 53° from F1 (the x-axis). The balancing (equilibrant) force is equal in magnitude but opposite in direction, i.e. 5 N directed 143° counterclockwise from F2.
- 2
In a playing room, a turntable of radius 2 m has moment of inertia 250 kg·m² and rotates about a frictionless vertical axle. When a boy of mass 50 kg stands near the rim, the system rotates with angular speed 3 rad/s. The boy walks toward the center and stands at 1 m from the axle. What is the final angular speed of the system?
- A3 rad/s
- B2.5 rad/s
- C4.5 rad/s
- D5.4 rad/s
Show answer
C 4.5 rad/s
By conservation of angular momentum, IᵢωΙ = I_fω_f: [250 + 50(2)²](3) = [250 + 50(1)²](ω_f), giving [250+200](3) = [250+50]ω_f, so 1350 = 300ω_f, and ω_f = 4.5 rad/s.
- 3
A thin circular ring of mass M, radius r, and moment of inertia Mr² rotates about its axis with constant angular velocity ω. Two objects each of mass m are attached gently to opposite ends of a diameter of the ring. What is the new angular velocity of the wheel?
- AωM/(M+m)
- Bω(M+2m)/(M+2m)
- Cω(M+2m)/M
- DωM/(M+2m)
Show answer
D ωM/(M+2m)
By conservation of angular momentum: Mr²ω = (M+2m)r²ω_f, since the two added masses each contribute mr² to the moment of inertia. Solving gives ω_f = ωM/(M+2m).
- 4
Five beads of equal mass are fixed on a rigid light rod free to rotate about a frictionless vertical bearing. Four of them are placed at 0.25 m and the fifth at 0.5 m from the axis of rotation. The rotational kinetic energy is 144 J when the beads rotate with angular speed 48 rad/s. What is the mass of each bead?
- A0.5 kg
- B0.25 kg
- C0.75 kg
- D1 kg
Show answer
B 0.25 kg
KE = ½Iω², where I = Σmr² = 4m(0.25)² + m(0.5)² = 0.25m + 0.25m = 0.5m. So 144 = ½(0.5m)(48²) = ½(0.5m)(2304) = 576m, giving m = 144/576 = 0.25 kg.
- 5
In which of the following cases is no work done by a dissipative force?
- AWhen a parachute jumps from a plane
- BOn a racing car in a desert
- CFor a freely falling object
- DWhen someone slides a box on a horizontal rough surface
Show answer
C For a freely falling object
A freely falling object (in the idealized case, with no air resistance considered) experiences no dissipative (non-conservative) force such as friction or drag, so no work is done by dissipative forces. Parachutes, cars on sand/desert terrain, and sliding boxes on rough surfaces all involve friction or drag doing dissipative work.
- 6
Which of the following is equal to the amount of work required to stop a moving object?
- AThe kinetic energy of the object
- BThe mass of the object times its acceleration
- CThe square of the velocity of the object
- DThe mass of the object times its velocity
Show answer
A The kinetic energy of the object
By the work-energy theorem, the work needed to bring a moving object to rest equals the negative of its kinetic energy — so the magnitude of work required to stop it equals its kinetic energy.
- 7
A 1 kg roller coaster is acted on by a 4 N force over a displacement of 2 m in the direction of the force, then released. It moves on a smooth horizontal surface toward a spring of constant K fixed to a wall. If the spring compresses by 20 cm to bring it to rest, what is the spring constant?
- A100 N/m
- B200 N/m
- C800 N/m
- D400 N/m
Show answer
D 400 N/m
The work done by the applied force, FS = 4×2 = 8 J, is converted entirely into elastic potential energy stored in the spring at maximum compression: FS = ½kΔx². So k = 2FS/Δx² = (2×8)/(0.2)² = 16/0.04 = 400 N/m.
- 8
A trolley is set to move on a smooth track banked at an angle of 30°. For a trolley moving at 5 m/s to round the curve, what is the radius of the banked surface?
Trolley moving at 5 m/s on a frictionless track banked at 30° to the horizontal. - A2.5 m
- B5.0 m
- C10 m
- D3.5 m
Show answer
B 5.0 m
On a banked, frictionless curve, the net force along the incline vanishes for the design speed: the centripetal requirement mv²/r equals mg·sin30° (resolving forces along the slope). So r = v²/(g·sin30°) = 25/(10×0.5) = 5 m.
- 9
A grade 11 physics teacher asked four students to measure the length of a classroom, providing a meter rule with centimeter divisions, vernier calipers, a micrometer screw gauge, and a meter tape with a centimeter scale but an invisible zero reading. Which instrument is appropriate for the task?
- AMeter rule
- BMicrometer screw gauge
- CVernier calipers
- DMeter tape (with unreadable zero)
Show answer
A Meter rule
For measuring a room-scale length, the meter rule with visible centimeter divisions is the practical and appropriate choice. The micrometer and vernier calipers are designed for very small, precise measurements (unsuitable for room-scale lengths), and the meter tape is unusable here since its zero reading cannot be read.
- 10
Which part of a scientific method report discusses the accuracy of measurements taken?
- AAim
- BMethods
- CTheory
- DResults
Show answer
B Methods
The Methods section of a scientific report is where the measurement procedure, instruments used, and their associated precision/accuracy are discussed.
Sit the whole paper with a timer, get your score, and read every answer explained.