Danulearn Open Danulearn

EUEE 2016 E.C. Physics questions and answers

⚛️ Physics2016 E.C.Natural Science60 questionsFirst 10 with answers
Year:20112012201320142015201620172018

📋 About this paper

Exam
Ethiopian Secondary School Leaving Certificate Examination (Physics)
Subject
PHYSICS
Sitting
Hamlie, 2016 E.C. / July, 2024 G.C.
Time allowed
2 hours 30 minutes
Questions
60
Exam directions
  • This booklet contains 60 multiple-choice questions (numbered 1-60).
  • Each question has four alternatives lettered A, B, C and D. Choose only the correct/best answer.
  • Use only a pencil to mark your answers and blacken the letter of your choice on the answer sheet, in line with the box on the separate answer sheet provided.
  • Erase all unnecessary marks completely. Any form of cheating is prohibited. You must immediately stop working when time is over.
  • A table of physical constants (g, mₚ, e, mₑ, G, Mᴇ, Rᴇ, ρ, R, ε₀, μ₀, K, h, Lᶠ, thermal conductivities, π, and common trig values) is provided in this booklet for use where needed.
  • This booklet's full 60 items are all reproduced here, each with a worked explanation.

Part I: Multiple Choice

Each question has four alternatives lettered A, B, C and D. Choose only the correct/best answer and blacken the letter of your choice on your answer sheet. A table of physical constants and trigonometric values is provided for reference.

  1. 1

    A pressure applied to one point in an enclosed incompressible fluid is transmitted to all parts of the fluid without reducing in value. This is the principle of

    • APascal.
    • BArchimedes.
    • CBernoulli.
    • DContinuity.
    Show answer

    A Pascal.

    This is the statement of Pascal's principle: pressure applied at any point in an enclosed, incompressible fluid is transmitted equally throughout the fluid. Archimedes' principle concerns buoyant force, Bernoulli's principle relates pressure and flow speed, and the continuity equation concerns conservation of mass flow rate.

  2. 2

    Which of the following statement describes uniform motion?

    • AAn object moving around a circular track with constant speed of 30 m/s
    • BAn object moving at 30 m/s toward East and then 30 m/s toward North
    • CAn object, starting from rest, moving on a straight line to attain a velocity of 30 m/s
    • DAn object moving with constant speed of 30 m/s in a straight line
    Show answer

    D An object moving with constant speed of 30 m/s in a straight line

    Uniform motion means constant velocity — unchanging speed AND direction — which only option D satisfies (constant speed, straight line). Circular motion at constant speed still changes direction (so velocity isn't constant), changing direction from East to North is a velocity change, and accelerating from rest is not constant velocity at all.

  3. 3

    Which of the following statement describes inertia of an object? It

    • Aincreases with an increasing velocity of the object.
    • Bincreases with increasing mass of the object.
    • Cis a physical quantity which has a unit of mass.
    • Dmakes to change state of rest of the object.
    Show answer

    B increases with increasing mass of the object.

    Inertia is an object's resistance to a change in its state of motion, and this resistance increases with the object's mass — not its velocity. Inertia itself isn't a measurable quantity with units (mass is merely its measure), and inertia resists changes in motion rather than causing them.

  4. 4

    Two objects, object A of mass m and object B of mass 2m are placed at heights of h₁ and h₂, respectively, from the surface of the earth. Assuming that the gravitational field strength is constant, the potential energy of object A is twice of that of object B, if

    • Ah₁ = 2h₂.
    • Bh₁ = ½h₂.
    • Ch₁ = 4h₂.
    • Dh₁ = ¼h₂.
    Show answer

    C h₁ = 4h₂.

    Gravitational PE is mgh, so PE_A = mgh₁ and PE_B = (2m)gh₂. Setting PE_A = 2·PE_B gives mgh₁ = 2(2m)gh₂ = 4mgh₂, so h₁ = 4h₂.

  5. 5

    A car travels 60 m north and then 80 m west. What is the magnitude of the resultant displacement of the car from its starting point?

    • A140 m
    • B100 m
    • C4800 m
    • D20 m
    Show answer

    B 100 m

    Since the two legs of the trip are perpendicular, the resultant displacement is the hypotenuse: √(60² + 80²) = √(3600 + 6400) = √10000 = 100 m.

  6. 6

    The velocity-time graph of an object moving along a straight line toward east is described by the figure shown below. What is the total displacement moved by the object?

    V (m/s)t (s)0510152025010203040
    Velocity-time graph: constant 30 m/s until t=15s, then linear decrease to 0 at t=20s.
    • A375 m East
    • B450 m East
    • C600 m East
    • D525 m East
    Show answer

    D 525 m East

    The area under the v-t graph gives displacement. From 0 to 15 s the object moves at a constant 30 m/s, covering 15 × 30 = 450 m (a rectangle). From 15 s to 20 s the velocity decreases linearly from 30 m/s to 0, covering ½ × 5 × 30 = 75 m (a triangle). Total displacement = 450 + 75 = 525 m East.

  7. 7

    A person of mass 75 kg experiences a net force of 400 N when placed in an upward accelerating lift. What is its apparent weight?

    • A1150N
    • B350N
    • C750N
    • D400N
    Show answer

    A 1150N

    Apparent weight is the normal force the lift floor exerts, which equals the person's true weight plus the net upward force causing the acceleration: mg + F_net = (75×10) + 400 = 750 + 400 = 1150 N.

  8. 8

    A block of mass 20 kg is pushed horizontally, at constant speed, along a rough horizontal floor over a distance of 5 m. If coefficient of kinetic friction between the block and the surface is 0.4, what is the amount of work done by friction?

    • A- 100 J
    • B- 1000 J
    • C- 400 J
    • D- 40 J
    Show answer

    C - 400 J

    The friction force is f = μmg = 0.4 × 20 × 10 = 80 N, opposing motion. Work done by friction = -f×d = -80 × 5 = -400 J.

  9. 9

    A 200N force is required to be applied at one end of a 1m long lever, 80cm from its fulcrum, in order to lift a load of 600N placed at the other end as shown the figure below. What is the efficiency of the lever?

    Load = 600 NEffort = 200 N80 cm
    Lever: 200 N effort at one end, fulcrum 80 cm away, 600 N load at the far end.
    • A75%
    • B83%
    • C25%
    • D17%
    Show answer

    A 75%

    The effort arm is 80 cm and the load arm is the remaining 1m − 80cm = 20 cm. Ideal mechanical advantage = effort arm/load arm = 80/20 = 4. Actual mechanical advantage = load/effort = 600/200 = 3. Efficiency = AMA/IMA = 3/4 = 75%.

  10. 10

    A substance with a mass of 2kg has a volume of 2.5x10⁻³ m³. What is the relative density of the substance?

    • A0.8
    • B1.25
    • C80
    • D8.0
    Show answer

    A 0.8

    Density = mass/volume = 2 / (2.5×10⁻³) = 800 kg/m³. Relative density = density of substance / density of water = 800/1000 = 0.8.

🔒
Questions 11–60 are in the Danulearn app

Sit the whole paper with a timer, get your score, and read every answer explained.

Other 2016 E.C. papers