Danulearn Open Danulearn

EUEE 2013 E.C. Physics questions and answers

⚛️ Physics2013 E.C.Natural Science50 questionsFirst 10 with answers
Year:20112012201320142015201620172018

📋 About this paper

Exam
Ethiopian University Entrance Exam (Physics) — Qubee Exam Book compilation
Subject
PHYSICS
Sitting
EUEE 2013/14 E.C. (2021 G.C.)
Time allowed
2 hours
Questions
50
Exam directions
  • This booklet contains 50 multiple-choice questions covering magnetism and electromagnetic induction, AC circuits, thermodynamics, waves and optics, electrostatics, measurement, mechanics, and rotational motion.
  • Each question has four alternatives lettered A, B, C and D. Only ONE of them is the best answer.
  • Read every question and all four alternatives carefully before you choose.
  • This compilation, produced by Qubee Academy, includes a worked solution and explanation for every item.

Part I: Multiple Choice

Choose the best answer from the given alternatives for each question.

  1. 1

    Kirchhoff's junction law state that:

    • ACurrent traversing any closed loop at particular time is zero.
    • BThe potential drop at a given junction equals the electromotive force at that particular point.
    • CCharge entering the junction equals the charge leaving that junction at particular time.
    • DThe sum of the voltage drop across any closed loop equals the sum of the electromotive force.
    Show answer

    C Charge entering the junction equals the charge leaving that junction at particular time.

    Kirchhoff's junction law is a statement of charge conservation at a node: the amount of charge entering a junction must equal the amount leaving it at any given instant (I = ΔQ/Δt). The other options describe unrelated ideas (a closed-loop current sum, a junction potential-EMF equivalence, or Kirchhoff's separate loop/voltage rule).

  2. 2

    Which one of the following statement is not correct about the magnetic properties of matter?

    • AThere is the tendency to oppose the applied magnetic field in a diamagnetic substance.
    • BThe unpaired electrons in diamagnetic materials will align with the applied magnetic field and parallel to each other.
    • CThe unpaired electrons in ferromagnetic materials will align with the applied magnetic field and parallel to each other.
    • DThe unpaired electrons in paramagnetic substance which will tend to align themselves in the same direction as the applied magnetic field.
    Show answer

    B The unpaired electrons in diamagnetic materials will align with the applied magnetic field and parallel to each other.

    Diamagnetism doesn't arise from aligning unpaired electrons — diamagnetic materials have no unpaired electrons to align at all; their weak opposition to an applied field comes from induced currents in paired electron orbitals. Paramagnetic materials do have unpaired electrons that align with the field (reinforcing it), and ferromagnetic materials have unpaired electrons that align with the field and stay parallel to each other even after the field is removed.

  3. 3

    Suppose a conductor of length l carrying a current I placed in a uniform magnetic field of magnitude B. when the conductors is making an angle θ with that of the magnetic field then the force experienced by the conductor due to the magnetic field is given by:

    • AF⃗ = I(B⃗ x l⃗ )
    • BF⃗ = BIlcosθ
    • CF⃗ = BIltanθ
    • DF⃗ = I(l⃗ x B⃗)
    Show answer

    D F⃗ = I(l⃗ x B⃗)

    The magnetic force on a current-carrying conductor is given by the cross product F⃗ = I(l⃗ × B⃗), with l⃗ in the direction of the current — the ordering of the cross product matters, and the magnitude works out to BIl sinθ rather than a cosine or tangent expression.

  4. 4

    Which one of the following statement is correct about tangent galvanometer?

    • AThe current through the coil of the wire generates a magnetic field at the center of the coil.
    • BIt consists of a coil of insulated copper wire on a circular magnetic frame.
    • CThe current is inversely proportional to the tangent of the angle of the needle's deflection.
    • DIt is a device used to measure the electric current in terms of the electric field it produces.
    Show answer

    A The current through the coil of the wire generates a magnetic field at the center of the coil.

    Current flowing through the coil of a tangent galvanometer generates a magnetic field at the center of the coil, which deflects a compass needle — the current is actually directly (not inversely) proportional to the tangent of that deflection angle, the coil frame is non-magnetic (not magnetic), and the device measures current in terms of the magnetic field it produces, not an electric field.

  5. 5

    A long conductor carries current I in the direction indicated by an upward arrow. Which statement is NOT correct about the magnetic field produced by this current carrying conductor?

    I
    A long straight conductor carrying current I upward, as indicated by the arrow.
    • ADoubling the current through the conductor doubles the field strength.
    • BReversing the current direction will reverse the direction of the magnetic field.
    • CThe magnetic field encircles the conductor.
    • DThe field strength is directly proportional to the distance from the conductor.
    Show answer

    D The field strength is directly proportional to the distance from the conductor.

    By B = μ₀I/(2πr), the field strength is inversely (not directly) proportional to the distance r from the wire — it weakens, not strengthens, farther from the conductor. Doubling the current does double B, the field does encircle the wire in concentric loops, and reversing the current does reverse the field's direction — all true statements.

  6. 6

    A coiled copper has 50 turns and coil cross-sectional area of 9 x 10⁻⁴ m². This coil is initially placed in a uniform magnetic field 0.02 T and pulled out of a field completely (where the field is zero) in 0.5 seconds. What is the magnitude of the induced electromotive force?

    • A3.2 mV
    • B9.0 mV
    • C18 mV
    • D1.8 mV
    Show answer

    D 1.8 mV

    Induced emf ε = NΔ(AB)/Δt = (50)(9×10⁻⁴)(0.02)/0.5 = 1.8 mV.

  7. 7

    A 15 mH inductor is used to indicate an electromotive force of 5.0 mV. What is the rate change of the induced current?

    • A3.0 A/s
    • B0.30 A/s
    • C0.33 A/s
    • D3.3 A/s
    Show answer

    C 0.33 A/s

    From ε = L(ΔI/Δt), the rate of change of current is ΔI/Δt = ε/L = (5.0 mV)/(15 mH) ≈ 0.33 A/s.

  8. 8

    A coil and permanent magnet are set in relative motion. Which one of the following statement is NOT correct about induced electromotive force?

    • ACoil with larger number of turns produce greater induced electromotive forces.
    • BMoving a magnet relative to the coil and the coil relative to the magnet with equal speed will produce the same electromotive force.
    • CThe magnitude of the induced electromotive is directly proportional to the relative velocity between the two.
    • DThe direction in which the coil moves relative to the magnetic field does not have any effect on the induced electromotive force.
    Show answer

    D The direction in which the coil moves relative to the magnetic field does not have any effect on the induced electromotive force.

    The direction of relative motion actually does matter — it determines the sign (polarity) of the induced emf via Faraday's/Lenz's law, so claiming it has no effect is the incorrect statement. More turns do produce a larger induced emf, relative motion (whichever object moves) produces the same emf for the same relative speed, and emf magnitude does scale with relative velocity.

  9. 9

    What is the advantage of using alternating current in transmission electric energy?

    • AIt enables to reach the consumers at very high voltage.
    • BIt enables a transformer to increase or decrease the voltage as required.
    • CIt completely avoids energy loss due to heating.
    • DIt uses very high current in the transmission line.
    Show answer

    B It enables a transformer to increase or decrease the voltage as required.

    AC's key transmission advantage is that transformers can step its voltage up or down as needed — high voltage (and correspondingly low current) reduces resistive heating losses over long transmission lines, but AC does not eliminate heating losses entirely, nor is high current or reaching consumers directly at high voltage the actual advantage.

  10. 10

    Capacitive reactance is defined as

    • AThe equivalent quantity to resistance when we are talking about capacitors.
    • BThe equivalent quantity to impedance of in RLC circuit.
    • CThe equivalent quantity to resistance when we are talking about inductors.
    • DThe equivalent quantity to resistance when we are talking about resistors.
    Show answer

    A The equivalent quantity to resistance when we are talking about capacitors.

    Capacitive reactance (Xc) plays the same role for capacitors that resistance plays for resistors — it's the opposition a capacitor presents to AC current flow, distinct from inductive reactance (for inductors) or overall impedance (which combines resistance and net reactance in an RLC circuit).

🔒
Questions 11–50 are in the Danulearn app

Sit the whole paper with a timer, get your score, and read every answer explained.

Other 2013 E.C. papers