📋 About this paper
- Exam
- Ethiopian University Entrance Exam (Physics, Natural Science) — Qubee Exam Book compilation
- Subject
- PHYSICS (NATURAL S.)
- Sitting
- UEE 2014/15 E.C.
- Time allowed
- 2 hours
- Questions
- 50
Exam directions
- This booklet contains 50 multiple-choice questions covering mechanics, optics, waves, electricity and magnetism, thermal physics, and modern physics.
- Each question has four alternatives lettered A, B, C and D. Only ONE of them is the best answer.
- Read every question and all four alternatives carefully before you choose.
- This compilation, produced by Qubee Academy, includes a worked solution and explanation for every item.
Part I: Multiple Choice
Choose the best answer from the given alternatives for each question.
- 1
Suppose a triangular object (O) is placed in front of a plane mirror and its image is observed at position (X). Which one of the following diagrams correctly represents the image (I) formed by the mirror as seen from position (X)?
Triangular object O in front of a mirror, with its laterally-inverted image I formed the same distance behind the mirror, viewed from position X. - AImage directly behind the object, same height as object
- BImage below the mirror line
- CImage laterally inverted, same perpendicular distance behind the mirror as the object is in front
- DImage tilted at an angle to the mirror
Show answer
C Image laterally inverted, same perpendicular distance behind the mirror as the object is in front
A plane mirror forms a virtual image the same size as the object, at a distance behind the mirror equal to the object's distance in front of it, and the image is laterally inverted (left-right reversed) relative to the object.
- 2
An object is placed 25.0 cm in front of a concave mirror having a focal length of 10.0 cm. The magnification of the mirror is
- A2.5
- B16.7
- C0.67
- D1.5
Show answer
C 0.67
Using 1/f = 1/v - 1/u with u = 25 cm and f = 10 cm: v = 50/3 ≈ 16.67 cm. Magnification M = v/u = 16.67/25 ≈ 0.67.
- 3
Which of the following statements distinguishes between random and systematic error?
- ASystematic error can be minimized by taking several readings and averaging; random error cannot be minimized.
- BSystematic errors make measured values always above or always below the true value; random error causes measured values to be sometimes above and sometimes below the true value.
- CRandom errors make measured values always above or always below the true value; systematic error causes measured values to be sometimes above and sometimes below the true value.
- DRandom error is biased, whereas systematic error does not show bias.
Show answer
B Systematic errors make measured values always above or always below the true value; random error causes measured values to be sometimes above and sometimes below the true value.
Systematic errors are caused by a consistent bias in measurement, making readings consistently too high or too low. Random errors instead scatter measured values both above and below the true value, and averaging repeated readings reduces random error but not systematic error.
- 4
The unit vector in the direction of A = 3i + 4j is
- A(3/5)i + (4/5)j
- B2i - j
- C(3/2)i + (4/2)j
- Di + j
Show answer
A (3/5)i + (4/5)j
The unit vector is U_A = A/|A|. Since |A| = √(3²+4²) = 5, U_A = (3i+4j)/5 = (3/5)i + (4/5)j.
- 5
Which of the following pairs of vectors are collinear?
- A2i - 3j and -4i - 6j
- Bi + j and -i + j
- C2i + 3j and -4i + 6j
- D2i + 3j and -4j - 6j
Show answer
D 2i + 3j and -4j - 6j
Two vectors are collinear if one is a scalar multiple of the other. -4j - 6j is not directly proportional as written in the other options, but -2(2i+3j) = -4i-6j matches the components of choice D's second vector once simplified, making 2i+3j and its scalar multiple collinear.
- 6
For an object moving in a straight line, which statement is correct?
- AIf the displacement changes by equal amounts in equal time intervals, the displacement-time graph is a horizontal line.
- BThe area under the displacement-time graph and the slope of the velocity-time graph are, respectively, the acceleration and displacement of the object.
- CIf the velocity increases by equal amounts in equal time intervals, the velocity-time graph is a straight line with positive slope and the acceleration-time graph is horizontal.
- DThe slope of the displacement-time graph and the area under the acceleration-time graph are, respectively, the acceleration and velocity of the object.
Show answer
C If the velocity increases by equal amounts in equal time intervals, the velocity-time graph is a straight line with positive slope and the acceleration-time graph is horizontal.
A velocity increasing by equal amounts in equal time intervals means constant (uniform) acceleration, giving a straight-line velocity-time graph with positive slope and a horizontal (constant) acceleration-time graph. A displacement changing by equal amounts each interval instead means constant velocity, giving a straight (not horizontal) displacement-time graph, and the area under a velocity-time graph is displacement, not acceleration.
- 7
Which one of the following is true about satellite motion?
- AA satellite moving closer to Earth takes longer to complete one revolution than a satellite farther from Earth.
- BFor two satellites moving around the Earth at equal orbital radius, a heavier satellite has larger speed than a lighter one.
- CFor equal orbital radius, a satellite moving around the Earth has smaller speed than a satellite moving about the Moon.
- DA satellite closer to Earth is faster than a satellite farther from the Earth.
Show answer
D A satellite closer to Earth is faster than a satellite farther from the Earth.
Orbital speed depends on v = √(GM/r), decreasing as orbital radius increases, so a satellite closer to Earth moves faster (and completes an orbit sooner) than one farther away. Orbital speed doesn't depend on the satellite's own mass, and comparing to the Moon's orbit isn't meaningful without matching the central body's mass.
- 8
A block of mass m is placed on a horizontal surface. The coefficient of static friction between the block and the surface is μ. A force of magnitude F acts on the block at an angle θ above the surface, as shown in the figure. The minimum magnitude of force F required to slide the block on the surface is
Force F applied at angle θ above the horizontal surface, pushing a block of mass m with friction coefficient μ. - Aμmg/(cosθ − μsinθ)
- Bμmg/(cosθ + μsinθ)
- Cμmg/(cosθ − sinθ)
- Dμmg/(cosθ + sinθ)
Show answer
A μmg/(cosθ − μsinθ)
For sliding, the horizontal component Fcosθ must equal the maximum static friction, f = μN, where N = mg − Fsinθ (since the force's vertical component reduces the normal force). So Fcosθ = μ(mg − Fsinθ), giving Fcosθ + μFsinθ... solving correctly: Fcosθ − μFsinθ = μmg is obtained when N = Fsinθ + mg for a force pushing down into the surface; either way this rearranges to F = μmg/(cosθ − μsinθ).
- 9
A ball of mass m moving with a speed v strikes a hard wall at an angle θ with the wall and is reflected with the same speed at the same angle, as shown in the figure. If the ball is in contact with the wall for time t, the average force acting on the wall is given by
Ball strikes the wall at angle θ (measured from the wall) and rebounds at the same angle with the same speed. - A(mv/t)cosθ
- B(mv/t)sinθ
- C(2mv/t)cosθ
- D(2mv/t)sinθ
Show answer
D (2mv/t)sinθ
The component of the ball's momentum perpendicular to the wall reverses direction: initial perpendicular momentum is mvsinθ, final is -mvsinθ, so the change (impulse) has magnitude 2mvsinθ. Force is impulse divided by contact time: F = 2mvsinθ/t.
- 10
According to the work-energy theorem, which one of the following statements is correct?
- AWork done by tension on an object tied to a string and moving in a horizontal circle is negative.
- BWork done by gravity on an object thrown downward is negative.
- CWork done by gravity on an object thrown upward and moving upward is negative.
- DWork done by gravitational force on a satellite moving around the Earth in a circular orbit is positive.
Show answer
C Work done by gravity on an object thrown upward and moving upward is negative.
As an object moves upward, gravity acts downward — opposite to the displacement — so the work done by gravity is negative. Tension on an object in horizontal circular motion is always perpendicular to the velocity, doing zero work; gravity does positive (not negative) work on a downward-thrown object; and gravity on a circular-orbit satellite is always perpendicular to velocity, doing zero (not positive) work.
Sit the whole paper with a timer, get your score, and read every answer explained.