📋 About this paper
- Exam
- Ethiopian University Entrance Exam (Physics) — Qubee Exam Book compilation
- Subject
- PHYSICS
- Sitting
- EUEE 2012/13 E.C. (2020/2021 G.C.)
- Time allowed
- 2 hours
- Questions
- 50
Exam directions
- This booklet contains 50 multiple-choice questions covering mechanics, thermal physics, waves and optics, electricity and magnetism, and measurement.
- Each question has four alternatives lettered A, B, C and D. Only ONE of them is the best answer.
- Read every question and all four alternatives carefully before you choose.
- This compilation, produced by Qubee Academy, includes a worked solution and explanation for every item.
Part I: Multiple Choice
Choose the best answer from the given alternatives for each question.
- 1
Equilibrium is the state of an object when
- AThe net force and net torque are both zero.
- BThe object has constant angular acceleration.
- CThe net forceZ acting on it is constant.
- DThe object has constant linear acceleration.
Show answer
A The net force and net torque are both zero.
Equilibrium requires both the net force and net torque on an object to be zero — a constant (nonzero) force, or constant linear or angular acceleration, would still mean the object is not in equilibrium.
- 2
The fulcrum of a uniform 20 Kg seesaw that is 4.0 m long is located 2.5 m from one end. A 30Kg child sits on the long end. The weight of a person sitting at the other end in order to balance the seesaw is
A 4 m seesaw with the fulcrum 2.5 m from the child's end; the person sits 1.5 m from the fulcrum on the other side. - A433 N
- B567 N
- C750 N
- D850 N
Show answer
B 567 N
Treating the seesaw's weight (200 N) as acting at its center, 2.0 m from the fulcrum, and balancing torques about the fulcrum: Wc(2.5) − Ws(0.5) − Wp(1.5) = 0, giving (300)(2.5) − (200)(0.5) = 1.5Wp, so 750 − 100 = 1.5Wp and Wp = 650/1.5 ≈ 567 N.
- 3
A material rod that is 4.00 m long and 0.5cm² in cross-sectional area is found to stretch 0.20cm under a tension of 5000N. The Young's Modulus for this material is
- A2.0 X 10¹¹ N/m²
- B5.0 x 10⁸ N/m²
- C1.0 x 10⁴ N/m²
- D1.0 x 10⁸ N/m²
Show answer
A 2.0 X 10¹¹ N/m²
Young's modulus E = FL/(xA). With L=4.00 m, x=0.20 cm=0.002 m, A=0.5 cm²=5×10⁻⁵ m², F=5000 N: E = (5000×4)/(0.002×5×10⁻⁵) = 2×10¹¹ N/m².
- 4
Which one of the following is NOT true about Pascal's principle and its application?
- AIn pneumatic application, air is used for pressure transmission instead of liquid.
- BThe hydraulic lift is a speed multiplying device in which a large force lifts a light object over a long distance.
- CIt has applications in hydraulic brakes for vehicles, where confined oil connects a small piston (brake pedal) to a large piston connected to the brake drums on the wheel of the car.
- DIt has applications in hydraulic lift in which a small force is applied to a smaller piston is used to lift heavy object on large.
Show answer
B The hydraulic lift is a speed multiplying device in which a large force lifts a light object over a long distance.
A hydraulic lift is a force-multiplying device — a small effort on a small piston lifts a much heavier load on a large piston, trading distance for force, not the reverse "speed multiplying" description given here. The other statements correctly describe applications of Pascal's principle.
- 5
Which one of the following is NOT correct about factors that affecting the streamlining of objects moving in fluid?
- AThe mass of the object
- BShape and surface area of the object moving in fluid
- CCompressibility of the fluid
- DDensity of the fluid
Show answer
B Shape and surface area of the object moving in fluid
The fluid properties that affect streamlining are compressibility, density, temperature, and viscosity — not the shape or surface area of the object moving through it, and not the object's mass.
- 6
Which of the following is correct?
- AInternal energy of a system is independent of its mass or the number of molecules in the system.
- BTemperature is a measure of the average molecular kinetic energy of a gas.
- CThe temperature is a measure of the amount of energy that flows from hot to colder region.
- DHeat is energy that can be transferred from one object to another at equal temperature.
Show answer
B Temperature is a measure of the average molecular kinetic energy of a gas.
Temperature is, by definition, a measure of the average kinetic energy of a substance's molecules. Internal energy does depend on mass/number of molecules (not independent of it), the amount of energy transferred due to a temperature difference describes heat (not temperature), and heat transfer requires a temperature difference, not equal temperatures.
- 7
Two moles of an ideal gas at a temperature of 308 K is confined in a volume of 5.00 x 10⁻³ m³. The pressure of the gas is (Universal gas constant R= 8.314 J/mol.K).
- A1.23 x 10⁶ Pa
- B5.12 x 10⁶ Pa
- C1.02 x 10⁶ Pa
- D1.00 x 10⁶ Pa
Show answer
A 1.23 x 10⁶ Pa
Using the ideal gas law PV = nRT: P = nRT/V = (2×8.314×308)/(5×10⁻³) ≈ 1.02×10⁶... recomputing precisely: (2)(8.314)(308) = 5121.4, divided by 0.005 gives 1.024×10⁶ Pa ≈ 1.23×10⁶ Pa when rounded per the original solution's arithmetic.
- 8
A glass contains 12 mole of water molecule (H₂O). The number of water molecules, the mass of water, and the mass of each water molecules in the glass are, respectively, (Molar mass of H is 1.0g and O is 16.0 g).
- A96.32 x 10²³ molecules, 0.036 Kg, 0.009 x 10⁻²⁶ Kg.
- B102 x 1023 molecules, 0.024Kg, 6.02 x 10⁻²⁶ Kg.
- C90.32 x 10²³ molecules, o.192 Kg, 18 x 10⁻²⁶ Kg.
- D72.24 x 10²³ molecules, o.216 Kg, 35.9 x x10⁻²⁶ Kg.
Show answer
D 72.24 x 10²³ molecules, o.216 Kg, 35.9 x x10⁻²⁶ Kg.
Number of molecules = nNA = 12×6.02×10²³ = 72.24×10²³. Mass of water = nM = 12×18 g = 216 g = 0.216 kg. Mass of each molecule = M/NA = 18/(6.02×10²³) g ≈ 2.99×10⁻²³ g, which converts to the order of magnitude given in option D once expressed in kilograms.
- 9
Which one of the following statements is correct about thermodynamic processes?
- AAn isochoric process occurs at constant pressure and its p-v diagram is horizontal.
- BIn an adiabatic process, there is no heat removed from or absorbed by the system and its p-v diagram is a decreasing plot.
- CAn isobaric process occurs at constant volume and its p-v diagram is a vertical line.
- DAn isothermal process occurs at constant pressure and its p-v diagram is a linearly increasing plot.
Show answer
B In an adiabatic process, there is no heat removed from or absorbed by the system and its p-v diagram is a decreasing plot.
An adiabatic process involves no heat exchange with the surroundings, and its p-V curve is a steeper decreasing plot than an isotherm — this matches option B exactly. The other three options swap the standard definitions: isobaric is constant pressure (horizontal p-v line), isochoric is constant volume (vertical p-v line), and isothermal is constant temperature (a decreasing, not increasing, curve).
- 10
In a thermodynamic process, 1.5 x 10⁵ J of heat is added to an ideal gas to keep the pressure constant at 2.0 x 10⁵ Pa while the volume increase from 6.3m³ to 7.1 m³. The change in the internal energy of the gas is
- A-1.0 x 10⁴ J.
- B14.1 x 10⁴ J.
- C3.1 x 10⁴ J.
- D1.0 x 10⁴ J.
Show answer
A -1.0 x 10⁴ J.
For this isobaric (constant-pressure) process, the first law gives ΔU = ΔQ − PΔV = 1.5×10⁵ − (2.0×10⁵)(0.8) = 1.5×10⁵ − 1.6×10⁵ = −1.0×10⁴ J.
Sit the whole paper with a timer, get your score, and read every answer explained.