Danulearn Open Danulearn
Unit 6

Solid Figures

πŸ“—Introduction
  • Solid figures are three-dimensional objects: they have length, width and height, so they have depth and take up space.
  • From lower grades you are familiar with cylinders, prisms, pyramids and cones and with formulas for their surface areas and volumes.
  • In this unit you will study the surface areas and volumes of spheres, frustums of pyramids and cones, and composite solids.
🎯 Learning Outcomes
  • Find surface area and volume of pyramids and cones.
  • Calculate volume of frustum of pyramids and cones.
6.1  Revision of Prisms and Cylinders
  • If LSA denotes the lateral surface area, BA the base area and TSA the total surface area of a right prism, then LSA = ph, where p is the perimeter of the base region and h the altitude; TSA = LSA + 2BA; and the volume is V = BA Β· h.
  • For a right triangular prism with base sides 3, 4, 5 cm and height 6 cm: LSA = 12 Γ— 6 = 72 cmΒ², BA = Β½ Γ— 3 Γ— 4 = 6 cmΒ², TSA = 84 cmΒ² and V = 36 cmΒ³.
πŸ”’
The rest of Unit 6 is in the Danulearn app

Read the full notes for all 5 sections, worked examples and figures, plus 18 exercises with step-by-step solutions, the Short Note and the unit review.

πŸ“‘ Contents

  1. 6.1Revision of Prisms and CylindersPreview
  2. 6.2Pyramids, Cones and SpheresπŸ”’
  3. 6.3Frustum of Pyramids and ConesπŸ”’
  4. 6.4Surface Area and Volume of Composed SolidsπŸ”’
  5. 6.5ApplicationsπŸ”’

✍️ Practice questions

5 questions from the Unit 6 quiz. Choose an answer, then check it.

  1. 1

    A solid figure with two parallel, congruent polygonal bases connected by rectangular (or parallelogram) lateral faces is called a:

    • ASphere
    • BPyramid
    • CPrism
    • DCone
    Show answer

    C Prism

  2. 2

    A solid figure with a circular base and one curved lateral surface meeting at a single vertex is called a:

    • ACube
    • BPrism
    • CCylinder
    • DCone
    Show answer

    D Cone

  3. 3

    A solid figure with a polygonal base and triangular faces meeting at a single vertex (apex) is called a:

    • APyramid
    • BSphere
    • CCylinder
    • DPrism
    Show answer

    A Pyramid

  4. 4

    A solid figure with two parallel circular bases connected by a curved lateral surface is called a:

    • AFrustum
    • BCone
    • CPyramid
    • DCylinder
    Show answer

    D Cylinder

  5. 5

    A perfectly round three-dimensional solid where every point on the surface is equidistant from the center is called a:

    • ACone
    • BPrism
    • CSphere
    • DCylinder
    Show answer

    C Sphere