Unit 5
Hardware Troubleshooting and Preventive Maintenance
Introduction
- A computer must be protected from anything that makes it malfunction, and every user should know the basics of finding and solving hardware problems.
- This unit has two parts.
- The first is hardware troubleshooting: the quick checks, the messages a computer gives when it starts, and the Windows tools that show what is wrong.
- The second is preventive maintenance: the regular care that stops problems before they happen.
π― Learning Outcomes
- Explain hardware troubleshooting and its procedures.
- Interpret POST messages, beep codes, BIOS and CMOS errors.
- Use Event Viewer, Device Manager and diagnostic tools to identify problems.
- Describe the methods of preventive maintenance.
- Protect a computer from dust, viruses, data loss, fragmentation and power problems.
5.1 Hardware Troubleshooting
- Hardware troubleshooting is a systematic approach to locating the cause of a fault in a computer system and solving the technical problem.
- It starts with general issues and then becomes more specific.
5.1.1Hardware Troubleshooting Procedures
- Hardware troubleshooting is the process of reviewing, diagnosing and identifying operational or technical problems in a hardware device.
- It aims to resolve physical and logical problems in computing hardware.
- Software troubleshooting, by contrast, is the process of scanning, identifying, diagnosing and resolving problems, errors and bugs in software.
Many computer problems are solved by a few simple checks.
π§PracticeFirst checks when a computer does not work
Work from the simplest cause to the less likely ones.
- 1Power outletCheck that the computer is plugged into a working power outlet.
- 2SwitchesCheck that everything is turned on.
- 3Blank screenIf the computer is on but the screen is blank, check that the monitor is plugged into power and that its cable is firmly connected to the system unit.
- 4Other devicesCheck that the keyboard, mouse, monitor and speakers are properly plugged in. Try a different port to see whether the port is the problem, or change the device if it is damaged.
0 of 4 done
Remember: Switch off the computer before any hardware maintenance, such as removing or replacing a part.
5.1.2Check POST
- POST stands for Power On Self-Test.
- It is the part of the computer's start-up program that tests the keyboard, the random access memory (RAM), the disk drives and other hardware to make sure they are working.
- If POST finds an error, it either shows a text error message on the screen or gives a series of short and long beeps.
π
The rest of Unit 5 is in the Danulearn app
Read the full notes for all 2 sections, worked examples and figures, plus 7 exercises with step-by-step solutions, the Short Note and the unit review.
π Contents
- 5.1Hardware TroubleshootingPreview
- 5.2Basics of Preventive Maintenanceπ