Danulearn Open Danulearn
Unit 4

Polymers

๐Ÿ“—Introduction
  • Polymers are all around us.
  • The clothes we wear (cotton, wool, polyester), the wood of our desks, our own hair and skin, the starch and protein in our food and countless plastic articles โ€“ water bottles, jerry cans, pipes, bags, buckets and chairs โ€“ are all made of polymers.
  • A polymer is a very large molecule (a macromolecule) built up by joining many small molecules, called monomers, with covalent bonds.
  • Some polymers are made by living things (natural polymers such as cellulose, starch, proteins, DNA and natural rubber), while others are made in factories, mainly from chemicals obtained from petroleum (synthetic polymers such as polyethylene, PVC, nylon and Teflon).
  • This unit first introduces the language of polymer chemistry โ€“ monomer, repeating unit, oligomer and degree of polymerization โ€“ and shows how to calculate the molar mass of a polymer.
  • It then explains the two ways polymers are made: addition (chain-growth) polymerization of unsaturated monomers, with its initiation, propagation and termination steps, and condensation (step-growth) polymerization of monomers carrying two functional groups, as in nylon, polyester and Bakelite.
  • Finally, polymers are classified by origin, by the kinds of monomer, by the type of reaction, by structure and by their response to heat, and the most important natural polymers (carbohydrates, proteins, nucleic acids, rubber) and synthetic plastics (polyethylene, polypropylene, PVC, PMMA, Teflon) are described with their properties, uses and environmental problems.
๐ŸŽฏ Learning Outcomes
  • Define polymer, monomer, oligomer, repeating unit and degree of polymerization, and recognise that most materials around you are polymers.
  • Describe addition and condensation polymerization, list the steps of addition polymerization and decide which type a given monomer undergoes.
  • Write the polymerization equation and the structure of a polymer from its monomer(s), and predict the monomer(s) of a given polymer from its structure.
  • Calculate the molar mass of a polymer, its degree of polymerization and the percentage composition of its repeating unit.
  • Classify polymers as natural or synthetic, homopolymers or copolymers, addition or condensation polymers, and thermoplastics or thermosets.
  • Describe the monomers, structures, properties and uses of plastics, rubbers, carbohydrates and proteins.
  • Relate the properties of plastics to their structures and uses, and explain the environmental problems caused by plastic waste.
  • Develop the inquiry skills of observing, predicting, classifying, communicating and inferring.
  • 4.1 Introduction to polymers (polymer, monomer, oligomer, repeating unit, degree of polymerization)
  • 4.2 Polymerization reactions (addition polymerization and its steps; condensation polymerization โ€“ nylon 6,6, Dacron, Bakelite)
  • 4.3 Classification of polymers (homopolymers and copolymers; natural polymers โ€“ carbohydrates, proteins, nucleic acids, rubber; synthetic polymers โ€“ polyethylene, polypropylene, PVC, PMMA, Teflon; thermoplastics and thermosets; uses and the environment)
  • Review Exercise
4.1  Introduction to Polymers
  • The word polymer comes from the Greek words poly, meaning many, and meros, meaning part.
  • A polymer is therefore a giant molecule built up from a large number of interconnected repeating units.
  • In simple terms, a polymer is a large chain-like molecule built up from many smaller molecules joined together by covalent bonds.
  • Because polymer molecules are so large, they are also called macromolecules (macro = large); their molar masses are usually between about 10โด and 10โถ g/mol.
  • A polymer is generally made of more than about 100 monomer units.
  • Structures containing only a few monomer units (from two up to a few tens) are called oligomers (oligo = few); dimers, trimers and tetramers are small oligomers.
  • Polymers and oligomers may be linear (a single long chain), slightly branched (short side chains attached to the main chain) or highly interconnected.
  • When the chains are joined to one another by many cross-links, the whole structure develops into a large three-dimensional network.
ShapeDescriptionExample
LinearOne long, unbranched chain of repeating unitsHigh-density polyethylene, nylon 6,6, cellulose
BranchedMain chain carrying shorter side chainsLow-density polyethylene, amylopectin (starch), glycogen
Cross-linked (network)Chains joined to one another by covalent bonds, forming a 3-D networkBakelite, vulcanised rubber, epoxy resin
Monomers and the repeating unit
  • The small molecules used as the basic building blocks of polymers are called monomers (mono = one).
  • To be able to form a chain, a monomer must be able to bond to at least two other monomers โ€“ for example by opening a C=C double bond, or by having two reactive functional groups.
  • Examples of polymers are polyethylene, wood (cellulose) and protein (Example 4.1).
๐Ÿ”’
The rest of Unit 4 is in the Danulearn app

Read the full notes for all 3 sections, worked examples and figures, plus 4 exercises with step-by-step solutions, the Short Note and the unit review.

๐Ÿ“‘ Contents

  1. 4.1Introduction to PolymersPreview
  2. 4.2Polymerization Reactions๐Ÿ”’
  3. 4.3Classification of Polymers๐Ÿ”’

โœ๏ธ Practice questions

5 questions from the Unit 4 quiz. Choose an answer, then check it.

  1. 1

    The word "polymer" is derived from Greek words meaning:

    • A"Small chain"
    • B"Heavy molecule"
    • C"Many parts"
    • D"One unit"
    Show answer

    C "Many parts"

  2. 2

    A polymer is best described as:

    • AA type of salt
    • BAn atom with many electrons
    • CA small single molecule
    • DA large, chain-like molecule made of many repeating units (monomers)
    Show answer

    D A large, chain-like molecule made of many repeating units (monomers)

  3. 3

    The small repeating molecular unit from which a polymer is built is called a:

    • AOligomer
    • BMonomer
    • CIsomer
    • DDimer
    Show answer

    B Monomer

  4. 4

    A polymer generally contains how many (approximately) monomer units, distinguishing it from an oligomer?

    • AMore than 100
    • BExactly 50
    • CExactly 2
    • DFewer than 10
    Show answer

    A More than 100

  5. 5

    In addition polymerization, the polymer is formed by:

    • AMonomers joining together with loss of a small molecule such as water
    • BMonomers with double bonds joining together without loss of any atoms
    • CBreaking monomers into smaller fragments
    • DReaction of an acid with a base only
    Show answer

    B Monomers with double bonds joining together without loss of any atoms